We can finish it for you! Choose your color and we will sand, stain/paint and use an indoor/outdoor clear coat spar urethane for extra protection.


Make sure to scroll to the bottom for all details.


Stains - We use the Varathane line of stains by Rustoleum, and Minwax stains (as long as Lowe's or Home Depot have them available).  There are certain Sherwin-Williams stains that we can get as well ($15 add for SW stain).  No commercial stains, very strong odor!


Paint - We use Valspar paints and there are many, many colors!  I keep Valspar Ultra White, Polished Ivory (creamy, off white) and black in stock.  Colors besides in stock colors may add $20.  I can use Sherwin-Williams colors as well since they are available at Lowes.


Ideas and More - Example, we have done a silver spray paint for a farm table base so we are open to ideas!


Sealing- We use spar urethane, satin.  Semi-gloss and gloss are available by request.  Spar urethane is an indoor/outdoor product and is very durable.  Spar Urethane is specially formulated as a protective clear finish for exterior or interior wood exposed to sunlight, water, or temperature changes.  It contains UV blockers to reduce the sun's graying and fading effects, forms a protective barrier against rain and moisture, and special oils allow the finish to expand and contract with the wood as seasons and temperatures change.  


We can do multi colored finishes, distressed finishes (worn) or physical distressing (Click for examples).  Some of this add-ons may be additional cost.


Q. - What is the difference between unfinished and finished?
          A. -  Unfinished is a raw wood product in which we do not sand, stain, paint or seal.  Finished is where we do sand, stain, paint and seal in a satin clear coat finish (available in semi-gloss and gloss upon request).


Choose your stain or paint color here -


Stains -

Varathane by Rustoleum Wood Stains (Kona is a popular color):
http://www.rustoleum.com/product-catalog/consumer-brands/varathane/varathane-fast-dry-wood-stain


http://www.rustoleum.com/product-catalog/consumer-brands/varathane/premium-wood-stains


Minwax Wood Stains Finish:
http://www.minwax.com/wood-products/stains/minwax-wood-finish#colors

Paint -

Valspar paints:
http://www.valsparpaint.com/en/index.html

Click on picture below, the caption or picture should have the color marked on the photo

Option 2 - is where we stain the wood, paint over and then sand it down to give it a worn look with multiple colors of the raw wood/paint/stain.  Normally addition $50 per table, $20 per bench and $15 per chair

Here are a few pictures for distressing to the worn look -


Option 1 - is where we paint over the wood and sand it down to get a raw wood/paint worn look

Jesus be the center of it all (Matthew 6:31-34)